Lutron Skylar Dimmer Switch Extension Cover Plate (Print-in-Place Joints)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Switch plate cover for Lutron Skylar Dimmer switch extends access 60mm left/right making it accessible behind furniture
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 228
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We have a dimmer switch that is now behind the mirror of our dresser. I designed this extension to enable us to control the lights without needing to squeeze our hand behind the mirror.
All of the joints are print in place. Placements of supports is critical for the functioning of the joints - I have included the painted support enforcers in the .3mf and .gcode files for the left side version, which I needed. I have also included the right-side mirrored version of the stl.
The model is composed of three parts designed to be printed in place, requiring no assembly. Simply remove the supports, apply light pressure to the joints and install.
Steps to painting on supports
- Apply Automatic Support Painting in PrusaSlicer
- Using the Clipping of view from the bottom view, make sure to remove/block all the supports between the 3 pieces
- Add supports on the visible edges of the bar and lever to make bridging better.
I found you had to push down on the top of the switch extension enclosure to separate the bar.
