DIN Rail Holder for Omron SSR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for the Omron SSR onto a standard DIN Rail
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I built a holder for a standard Omron SSR around the great DIN clamp fo fabian (sorry, not being able to find a proper link to it anymore). I needed this SSR to attach to the DIN rail on the back of my 3D printer.
It consists of two parts:
- the DIN rail clamp
- the SSR holder
The SSR holder must be first mounted to the clamp using four M2.5x6mm socket head screws. Then attach the SSR board itself to the holder, using another 4 screws of the same type. The SSR holder can be rotated 90° or 180° to better accomodate for the wiring of the SSR.
I printed this in PETG without supports. Probably don't matter, but the clamp I'd print in a material which is flexible to some degree, probably PET is too stiff and the spring might break.
I'm not gonna ask for a coffee, but please make sure you give me a like if you find this model useful.