Gaggia Portafilter Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is meant to hold a Gaggia portafilter on the wall.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 174
- Wydruki
- 1
- Wyświetlenia
- 1390
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
This is a portafilter holder, it is meant for a wall on the left, with the handle facing you. The weight of the handle keeps it screwed in, but its super easy to remove.
I created this for the Gaggia 58mm portafilters, but it should work for any 58mm portafilter with similar lug size. The Gaggia portafilters have the lugs angled differently, so they don't fit well into other portafilter holders.
If you need the handle to face away on a left side wall, or if you need it to face you on a right side wall, simply mirror the part. If that doesn't make sense, print it out and see, if it “unscrews” and falls off the wall, you know you need to mirror it. ;)
No supports needed, print at whatever settings you feel like you need.
While this does not touch food directly, it does touch food tools. If this bothers you, print it with food safe processes, or coat it in food-safe epoxy (https://www.alumilite.com/resins/amazing-clear-cast/). I wouldn't recommend resin printing this without a coating, the resin offgassing might produce off-notes in the coffee.