Losi Tenacity DB Pro Receiver Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a receiver box for a Losi Tenacity DB Pro.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a receiver box for a Losi Tenacity DB Pro. Out of the box, the receiver is double-side taped to the Servo where it falls off constantly and can get caked with mud and dirt from the front tire. This box is in no way waterproof (although it could probably be made waterproof) but protects the servo from debris and keeps it from falling off.
Requires: Modification of servo mount, center diff housing, and two M3 x 10mm screws to hold the lid on.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
50
Filament: Inland PLA White
Notes:
Use supports on lid and set it on bottom
Category: R/C Vehicles