1 / 1
Window stopper — zdjęcie 1

Window stopper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Works if you have a tablet just below the window. Just insert of remove the stick to keep the window opened.

Ocena
5 / 5
Polubienia
33
Pobrania
289
Wydruki
4
Wyświetlenia
1130
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

If you have a tablet* below your window, you might like to screw this little block and use the stick to keep the window wide open or opened just the way you prefer.

Print the bar horizontal to make it stronger.

PLA is fine, 0.20mm, 20% infill, no supports.

 

*up to 25mm tablet.