Appliance Cable Holder - Printed in Vase Mode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable manager that stick to an electric appliance. It has a clip on both sides so that you can use it a standalone…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 85
- Wydruki
- 1
- Wyświetlenia
- 286
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Cable manager that stick to an electric appliance. It has a clip on both sides so that you can use it a standalone cable as well.
In designing the model, I ensure the edges and corners are rounded to prevent damage to the cable. It can be printed in vase mode or normal mode without any infill.
I uploaded different versions that fit different cable diameters. You can also scale the model for different length of cable. For example, the smaller on in the photos was printed using 5mm clip version with a scale of 73%. The resulting clip gap is 3.65mm to fit a 4mm cable.
Category: Organization