FGC-6 H / BL mkii Stingray replica starter kit GBB GBBR airsoft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AIRSOFT GBBR SET
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 159
- Wydruki
- 1
- Wyświetlenia
- 1052
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
----------------
the parts list and the documentation to get started can be found here the link to the new manuals can be found here
https://drive.google.com/drive/folders/1cR-nfubPEXCrr6-0PsUFC_jSHIq18V4U?usp=sharing
---------------
documents reading order
Project explained
How to use it
How to make it
Tester data
then the parts list / files from the starter set
--------------------------------------
2-11-2025
bolt, disconnect, upper is updated so you can do reloads wile the bolt is resting against the disconnect.
The disconnect is also updated to be stronger
all the files have been moved to zip files!
--
3-10-2025
triton-6 mag catches added
______________________
10-08-2025
M5G lowers haven been updated to have 1 extra M3 , 25mm reinforcement bolt
-------------
28-06-2025
CM-1 trigger is updated to work with the 3d printed fire selector
__
02-06-2025
UNW-T6 outer barrel options added
---
25-05-2025
CM-1 fgc6 FCG option added and documentation is updated for this
---
27-01-2025
rogue-6 mag bar version added
3DN6 HUU, bolt and nozzle added
------
26-01-2025
manuals updated
with 3DN6 testing data and notes
---
22-12-2024
KWA / KSC bolt have been added
__
19-12-2024
tester data, how to use, how to build PDF's are updated for KWA /KSC bolt data
-
24-11-2024
Rogue mag catch bar added version
---
11-10-2024
M5 nut lower have been added. for a stronger connection
it will use a 30mm long M5 bolt with 3d printed grips
-------
9-10-2024
the brass lowers have been updated to a 4.15mm hole hole so it's a bit tighter then the original was
----
7-10-24
the S bolt fronts have been moved to the advance parts kit.
the brass inserts uppers have been updated to have a 4.15mm hole so it's a bit tighter then the original was
--
4-10-2024
some packages where missing the 3d charging handle knob
---
25-09-2024
updated the green gas 2 way inlet valve section in the how to use pdf
_____
18-09-2024
co2 testing data added starts at page 38
and other manuals got some updates about CO2 and green gas
_____
13-09-2024
TM G 18c bolt added
_____
12-09-2024
bolt fronts have been updated with 2 options S (short) and N (normal) this will determent how far the nozzle can slide in the bolt.
___
07-09-2024
APS XTP ACP bolts fronts have been added
small update on the M1D fire pin and left frame to act as a mag stop. and prevent gas from escaping when the mag is over inserted
__________
16-06-2014
new bolt fronts added it's highly recommended to update to this bolt front. So the nozzle cant fly out the front of the bolt in case of some tolerance issues. This update does not apply to AAP01 nozzles.
But this would bend the nozzle spring and gives ware on the nozzle that is unwanted.
https://youtu.be/3N8hDKkQq5k
______________________
the parts list can be found here
https://drive.google.com/drive/folders/1ppDKxs2tu0rj9MaRVWfpiozERtG7PVGz?usp=sharing
how it works as a BL build
how it works as a H build
how it works as a SF build
______________________
5-5-2024
SF lowers added
SR6 lowers added
Mag catch bar Partisan version added
----------------------
4 -5-2024
stingray mag catches file cleaned up.
M1D Left side export error fixed
UNW trigger model have been added
--------------
--------------
This Stingray model is internally speaking for the most part 1 on 1 the same as the FGC-6 MKII series. There for tester data from the FGC-6 H , BL , SF can be considered the same fro this model.
Where the compatibly starts to break is with the external parts, shroud, uppers, stocks, and lowers are not cross compatible. So keep that in mind when you want to go for a custom build if that is even possible to do.
Also this uses his own outer barrel system that have the fallowing sizes
300mm
300mm with 14mm CCW barrel tip
370mm
370mm with 14mm CCW barrel tip
400mm
400mm with 14mm CCW barrel tip
the FGC-6 SF parts are fully compatible with this set. except for the SF lower
https://www.printables.com/model/676226
use the FGC-6 stingray Collection to find compatible mod parts
https://cults3d.com/en/design-collections/UntangleART/fgc-6-mkii-stingray-parts
https://www.printables.com/@UntangleWORKS/collections/941769