Duplicator 9 Dial Indicator Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dial indicator mount that I designed to fit onto the front of the Duplicator 9 extruder. It is meant to be…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a dial indicator mount that I designed to fit onto the front of the Duplicator 9 extruder. It is meant to be used when the extruder is not heated up to probe around the bed to see how level things are compared to the X axis extruded aluminum bar. I designed it to fit the MK2 and the MK1.
Print Settings
Printer:
Duplicator 9
Rafts:
No
Yes
Resolution:
0.2 mm
20%
Filament: 3D Solutech PLA White
Notes:
Print using supports and in the orientation that the STL was created (The face that goes against the extruder is down).
Category: 3D Printer Accessories