Bag Strap Badge with Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A strap decoration for your bags. Add logos from your favorite games or other products.
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 625
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of a a popular bag decoration. I added features from a second model to improve upon the original. Both inspirations are listed in the remix section.
To add a logo, replace the logo sketch with the sketch of your choice. Cut the original body and then extrude from the same sketch.
To print: export both bodies as STLs and add them to PRUSA Slicer at the same time (it should prompt you to make them a “single object”, accept this prompt. Place the logo face down. Add a second head to the printer configuration and have each body print from a separate head. Use custom g-code to make a head change execute a filament swap. This will allow you to print multi-material/head prints with a single print head. You will need to manually swap filament until the logo is finished.
Parametric Dimensions:
- armWidth: Defines the width of the arms
- webThickness: Adjust for thicker webbing
- webGap: Opening size to fit web through
- webWidth: This plus armWidth define badge height
- badgeWidth: Badge width excluding the arms
- badgeThickness: Defines how thick the badge is