M6 bolt knob low profile for 10" sawblade holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M6 bolt knob low profile for 10" sawblade holder
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 34
- Wydruki
- 2
- Wyświetlenia
- 165
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
M6 bolt knob low profile for 10" sawblade holder
I bought a 10" tablesaw blade holder, it's a popular model, black, square, it has a large start knob and long black bolt that holds the blade.
Everyone likes the blade holder but hates the protruding knob and long bolt that goes out the back.
I wanted to replace the knob with a low profile, flat round disc that just covers the bolt head, and I used a shorter bolt, or just cut down an existing one.
Knob is 40mm diameter.
Hex bolt head is 10mm wide.
Hex bolt head is 4mm deep.
Bolt hole is 6mm wide.
20% infill
Rafts = No
Brim = No