1 / 1
Cable tie holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cable tie holder is made to fit Modul-System racking systems for transport vehicles.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 406
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
A cable tie holder for Modul-System racking systems for transport vehicles that can hold four different cable tie lengths.
Test printed on Prusa Mk4 with Prusament PETG Jet Black, 0.2 layer hight and 50% infill.
2024-05-08
Adjusted size for snap-in nut
2024-05-07
Updated with adjusted fittings and size.
Also adding fastener and snap in nut. These should be printed in 100% infill and preferable ABS plastic, tested with PETG.