Adjustable hand trainer - hand rehabilitation - All printable!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
All printable hand trainer for rehabilitation. Adjustable resistance with household rubber bands!
- Ocena
- 4 / 5
- Polubienia
- 16
- Pobrania
- 159
- Wydruki
- 1
- Wyświetlenia
- 509
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution
I recently injured my hand, and I need to rehabilitate it with gradually more and more resistance for the training. So I made this thing, which prints at home, and with some regular rubber bands I can easily adjust the tension as I regain my grip strength.
This design was confirmed as sensible by my physio therapist, and to me it seems to work well.
To assemble, press the splint pin into the holes of the two halfs, this step can be a bit hard if you have low hand strength. If you struggle, I suggest using some tools to help. For example a vice.
Printed in PLA at 0.2mm layer height using 3 perimiters and 10% Gyroid infill.
Any 3D infill type should work just fine, and I have had no issues with the gripper breaking.