Spectacles Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spectacles Case
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free.
Spectacles case.
You will require 2 round 8x3mm neodymium magnets. Use a piece of 1.75mm filament for the hinge, cut to length and secure the ends with a dab of superglue.
Because of the small contact patch on the print bed I recommend you use glue and/or a brim to mitigate warping. The trick to a successful difficult print is slow and steady as she blows.
To open your case place your thumbs on opposite ends of the case as shown in the photo below.
Happy printing..