1 / 2
Nike Logo on Shoe Stand**REQUIRES SCALE DOWN** — zdjęcie 1
1 / 2

Nike Logo on Shoe Stand**REQUIRES SCALE DOWN**

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Nike logo Mounted on a shoe stand that requires a scale down to 80%.

Ocena
0 / 5
Polubienia
2
Pobrania
19
Wydruki
0
Wyświetlenia
187
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

**Model on display was scaled down to 80%**

Assembly Instructions

Part Display:

Part Chart:

Step 1:

Put part 4 in the dish:

Before:

After:

Step 2:

Put part 3 in the dish:

Before:

After:

Step 3:

Put part 2 in the dish:

Before:

After:

Step 4:

Put part 5 in the dish:

Before:

After:

Step 5:

Put part 14 in the dish:

Before:

After:

Step 6:

Put letter E and swoosh along with its spacers parts 8, 12 and 13 in the dish:

Step 7:

Put letter N in the dish:

Before:

After:

Step 8:

Put letter I and its spacers parts 6 and 7 in the dish:

Before:

After:

Step 9:

Put letter K in the dish:

Before:

After:

Step 10:

Put parts 9,10 and 11 in the dish:

Step 11:

Put part 1 in the dish:

Before:

After:

 

Design Choices

I had to scale down the model since it was constructed at too large of a scale to fit on the 3d-Printer leading to some issues with the 0.4 mm gap I gave all the pieces shrinking. This led us to have to remove the elephant's foot from smaller parts for them to fit.

Elephant foot being removed:


 

I chose a more complex dish design due to the simplicity of our logo to really help it pop. I determined the “dish” by tracing over the black lines shown below. The resulting white parts left over were individually traced and manufactured into their own parts.

Original Image:

After printing and inlay of Nike Logo:

I chose an extruded shell as our base due to the versatility of the option. This option allowed us to keep the profile of our print whilst keeping the filament required low and extruder travel at 0 to reduce the risk of stringing or deformations in our print.

In Solidworks:

After Printing:

I chose to make the E and the Swoosh in the Nike logo one piece for a smoother finish and to omit unnecessary gapping.

In SolidWorks:

After Printing:

 

Contributors

I worked with a partner on this project go checkout his page @Najerry_1885654.