More Round Containers with Screw-On Lids

This is a collection of screw-top containers for holding... well, whatever you want!

There are currently 6 different styles, each in 3 different sizes (see Customization section below if you need other sizes). Each container has a separately printed color ring which allows you to color-code each container. If you do not want a color ring, use the container files named *_Container_NoCR.stl.

Included sizes: The outside diameters will vary slightly depending on which style of container is used. The lids may be slightly larger in diameter due to the protrusions (for gripping). With those statements in mind, the approximate dimensions of the included STL files are given below.

25mm x 25mm:

• ~32mm outside diameter, 25mm inside diameter
• 27.4mm outside height, 25mm inside height
• 21mm throat diameter
• 7mm Lid height

34mm x 40mm:

• ~42mm outside diameter, 34mm inside diameter
• 42.4mm outside height, 40mm inside height
• 30mm throat diameter
• 7mm Lid height

70mm x 70mm:

• ~78mm outside diameter, 70mm inside diameter
• 72.4mm outside height, 70mm inside height
• 66mm throat diameter
• 10mm Lid height

Customization: I have included parameterized Fusion360 files so you can create the exact size you need. The parameters used to created the included STL files can also be found in the Parameters.zip file, in case you want to tweak them. 

Note: To make it easier to enlarge the designs significantly (150mm for example), I patterned way beyond the sizes I anticipate anyone will need. Since most of the pattern is beyond the extents of the model, you may see errors when changing the sizes of the container. This is expected, and shouldn't be a problem. Simply ignore the errors.

Thread Clearance: If the threads are too tight (or too loose), you may need to adjust the ThreadClearance parameter in the Fusion360 file to allow for a better fit. I have found different requirements for different filaments. If you make an adjustment, you only need to reprint the lid! The clearance parameter has no effect on the base containers or color rings.

I printed these with a 0.6mm nozzle and 0.28mm layer height.

Leave a comment and let me know what styles and sizes you like the most!