Lamp #19
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple oval shade that can uses Lamp Base#4 with a shade with an open end and a 30 mm opening.
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 589
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
A oval lamp shade that can uses Lamp Base#4 and both a holder and a shade having a 30 mm hole. This lamp also uses a cap.
As the shade has a 30 mm opening, the bottom holder is optional and the lamp can be setup with or without it as shown in the pictures.
https://www.printables.com/model/858997-lamp-base-4
The shade is 150 mm height x 220 Width.
With the base, the lamp is 260 mm height and 220 mm wide.
No supports required.
The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9
The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58
The E14 Bulb used here:
https://www.ikea.com/de/de/p/solhetta-led-leuchtmittel-e14-470-lm-rund-opalweiss-90498707/
The slicer settings for the base, cap, holder and the tall neck:
.20 mm Standard and
(All standard settings and speeds, Random seam settings
Filament: Eryone PLA+ Matte Black
The shade itself was printed using a white PLA..
Sunlu PLA+ White
The slicer settings:
.16 mm High Quality and Generic PLA
Infill % - 30 , Gyroid
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Outer Wall Speed - 60 mm/s
Inner Wall - 150 mm/s
Seam Position- Random