D20 Dice tower - DnD / D&D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
20cm high double D20 Dice tower, printed in two parts and without supports.
- Ocena
- 5 / 5
- Polubienia
- 157
- Pobrania
- 526
- Wydruki
- 2
- Wyświetlenia
- 3596
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Greetings, everyone!
I'm thrilled to present my entry for the Dice Towers contest: The D20 dice tower!
To ensure seamless printing, I've made modifications to the numbers so that no supports are required. You can easily remove any residual supports with a razor blade after printing.
The maximum diameter of the dice accommodated is 30mm, more than enough for standard-sized D&D dice (bigger 34mm D20 exist so check beforehand).
Example print details: 30mm layer height, 10% gyroid infill, with each part taking approximately 6 hours and 30 minutes to print. Glued the two parts using Tamiya patty, i will post the painted version in a few days.
Please note: The images depict an earlier version where the dice were not ejected quickly enough. This issue has since been resolved.