1 / 6
dampener plate for Prusa i3 MK2 (squash ball) — zdjęcie 1
1 / 6

dampener plate for Prusa i3 MK2 (squash ball)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

You all know that the geometry of Original Prusa i3 MK2 is quite tricky. When you have a flat and square frame, you…

Ocena
0 / 5
Polubienia
1
Pobrania
15
Wydruki
0
Wyświetlenia
575
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

You all know that the geometry of Original Prusa i3 MK2 is quite tricky. When you have a flat and square frame, you would like to keep it flat ... a long time !
However if you move the printer you may wrap a little the XY frame and loose the XYZ calibration.
I have thus designed this reinforcement plate with two goals in mind :

  • add some stiffness to the XY frame and keep it horizontal ... forever
  • dampen the vibrations with my squash ball feets Here is the result : it works really well, you just have to :

  • cut a wood base following the template (or better with a CNC -what I did-)

  • Then fix the supports with four screws
  • fix the dampeners on the bottom side : https://www.thingiverse.com/thing:2450161
  • put the printer on the supports and tighten it with four zip ties And that's it, your frame will remain absolutly flat, and you have a dampened printer !

    Print Settings

Printer Brand:

Prusa

Printer:

Prusa Mk2

Rafts:

No

Supports:

No

Resolution:

150 µm

Infill:

60%

Notes:

9 perimeters to have very strong result (but not mandatory !)

Category: 3D Printer Parts

Tagi