Wyrmwood DM Screen Compatible Initiative Tracker System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable initiative tracker system designed to be compatible with the Wyrmwood DM Screen
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 148
- Wydruki
- 1
- Wyświetlenia
- 1212
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I really like the initiative trackers on my Wyrmwood DM screen, but the need to write down names on both sides of the tile before you set them up does cost a little bit of time and the tiles themselves cost a bit of money. So I decided to 3D print some of my own.
I've included a set of tiles numbered 1-5 for NPCs, a blank tile, and a few examples of some of the customized ones I whipped up for some of my players. The included STEP file has many more examples you can either customize to fit your table or simply use as inspiration for your own designs. For best results print in the provided orientation using a smooth or very lightly textured build surface. The customized examples provided were designed to be printed with a .25mm nozzle using layer heights between .1 and .2mm, the numbers and blank tile can work with pretty much anything.
But wait, there's more! If you don't have a DM screen but still want to use these tiles, you can. All you really need is a rail with a ¼"/6.5mm channel routed down the middle to hold them. For those without a router, I've included a 3D printed example (though as it's designed to fit on a standard build plate you may need multiples of it for your table.)