1 / 3
Smarter HEPA QT3 Air Purifier T-Core Power Bank Tray Spacer — zdjęcie 1
1 / 3

Smarter HEPA QT3 Air Purifier T-Core Power Bank Tray Spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tray/spacer for the T-Core 20000M to reduce rattling. Also has space for a short USB cable.

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
231
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The T-Core Power Bank 20000M fits in the storage compartment on top of the Smarter HEPA/Smart Air QT3 Air Purifier, but tends to bang around. This tray/spacer greatly reduces that.

Options:
  • “Single Piece” - single part, intended for printing in a flexible filament. The opening on the storage compartment is a little small but this part will go in with some persistence. I can't guarantee it will come out intact.
  • “Single Piece No Wings” - eliminates the side “wings”. It will go into the compartment more easily and it will fit the power bank properly, but I don't know how well it will prevent side-to-side motion.
  • “Split A-D” - used for testing mainly but these can be printed in a non-flexible filament and inserted in sequence. Still works reasonably well.
Slicing:

The model is slightly too thin in one section and you will get a missing slice if you're using 0.2 mm layers. It still works fine. 

Tagi