Cybertruck Lug nut cover spike
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lug nut cap that makes the truck look tougher without being over the top. Doesn't stick out much, but a cool detail.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 152
- Wydruki
- 0
- Wyświetlenia
- 1169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a lug nut cover that added a little attitude to the truck. It adds a bit of a mad-max vibe and it's a cool detail that only some people notice.
Print in ABS, PETG, or similar to temp resistance and durability. ABS shrinks a little and fits more snug, which I like. These work as printed, but you can add a spring tab for potentially longer life and better retention.
Print Settings:
- 20-30% infill
- 4-5 perimeters (Important!)
- ABS, PETG, or similar.
Optional Spring Tabs:
I designed slots in the side to add spring-steel tabs for retention. You DO NOT need to use them. They stay on just fine without them. However, I figured the plastic would deform over time and the tabs could help hold it on. If you want to do this, the easiest way is to buy the spring-steel clips that are meant for window screens and bend them into the general shape in the picture.
Spring clips: https://www.acehardware.com/departments/hardware/window-and-screen-hardware/window-components-and-hardware/5187257)
Wheel Center Cap:
I made a remix of someone else's design. Can be found here: https://www.thingiverse.com/thing:6607947