1 / 2
M80x1 threaded dust caps, male and female — zdjęcie 1
1 / 2

M80x1 threaded dust caps, male and female

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

M90x1 threaded dust caps, male and female, for astronomy.

Ocena
0 / 5
Polubienia
1
Pobrania
47
Wydruki
0
Wyświetlenia
142
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

M80x1 threaded dust caps, male and female, for astronomy.

These threaded dust caps are useful for astronomy cameras, telescopes and adapters. This thread size is used on Lunt LS50Tha solar telescope front caps and Lunt LS50C compact double-stack solar filter front and rear caps.

I print these dust caps out of PLA+ and have found that the threads print nicer in PLA+ vs PETG and that sometimes the threads are so fine that they don't fit as well with PETG. YMMV. Try enlarging/reducing the X/Y axes by 0.5% if they are too loose or tight.

Tagi