Zipper jig in less than one hour
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zipper Jig for tailors and repairing zippers.
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 269
- Wydruki
- 1
- Wyświetlenia
- 2002
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a little jig for better handling with zippers.
If you are a tailor this is a must have for you!
You can build the zippers easy like shown in the pictures.
Just clamp the jig to a table. ( clamp wide 12mm, thickness 3mm)
But this is not only for tailors:
Who does not know this scene, your best loved jeans has a broken zipper and fixing it is a real pain because of this tiny little parts which do not wanna hold in place… ( I know it is, but dont worry you are not alone anymore, my friend :) )
Mostly you will do two or three trys and throw it away, am i right ?
Now this will have an end, just use this jig handheld, put in the zipper, open it with a flat screwdriver align everything where it has to be and close the zipper again with a pliers.
So dont wait and be the hero of your girlfriend / mom, print it right now so you have it when you need it!
Print it in 53 minutes with 0.2 Quality settings in Prusa Slicer. The back is flat so you can print with no supports, like shown in the picture.