Cygolite Hotshot bike lamp mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fixed mount for the Cygolite Hotshot Pro bike lamps. I use it to mount the lamp to a rear rack, and for charging
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
This is a holder for the Cygolite Hotshot Pro bicycle lamps. The mounts from Cygolite are designed to attach to the seat post, but may be obstructed when a rear rack is used. This design uses and M6 screw and nut to hold the mount (and light) onto a rear rack.
I designed this prior to seeing the other couple of designs out there. Prints well in TPU with 95 or 98 hardness so that the lamp stays locked in. I used the Filamentum Flexfil TPU 98A which has a setting the PrusaSlicer menu thru a 0.4mm nozzle and 100% infill on a MK3. printed fine the first time on the textured build plate.