1 / 4
Ryobi P601 Trim Router Magnetic Wrench Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted some way to keep the wrench with the router when not being used.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (24)Powiązane
Clips onto clamp lever but does not interfere with lever movement. Uses two 12mm x 3mm neodymium magnets. Thicker magnets can be used. Nothing particular about printer settings but a brim or raft may be needed for good adhesion.