M20 support for 16mm grow tent poles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support for European M20 installation tubing, " Leerrohr " with exactly 20mm diameter. Fits 16mm Poles
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 513
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Supports 20mm Installation PVC Tubes on a common 16.1mm growtent pole.
Made this to stop my tent from getting sucked together by exhaust fan pressure
Printed with
- 0.4 Nozzle
- 0,2 Layerheight
- Polymaker ASA
- No Support
- 100% Infill
Please be aware that printer settings vary extremely so print this with a known profile and slice accordingly.
If you can achieve it, ive put ziptie slots on the underside but you gotta have some solution to print it like raising the print on the bed.
Poles snap right on, very satisfied.
Feel free to leave a make, short picture upload, done. Thank you very much