Lawn Mower Blade Balancer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed the balancing cone to remove the overhangs and increase the resolution for blade center holes.
- Ocena
- 4,923 / 5
- Polubienia
- 67
- Pobrania
- 782
- Wydruki
- 14
- Wyświetlenia
- 1679
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix to address some issues I had with the original design.
Printing info:
PLA
0.4mm nozzle
0.20mm layer height
15% infill
[UPDATE 6/22/2026] Per request, here are the diameters for the steps on the original model as posted. The sizes are as follows, starting at the top: 12mm, 16mm, 20mm, 24mm, 28mm, ……continuing is 4mm steps. I chose 4mm steps as that provides 2mm support for the blade around the hole.
If you need a different size, I have added a new print profile with 4 different cones with smaller starting diameters. I made a different plate for each starting diameter indicated by the number on the very top. Each step increases by 4mm in diameter. Choose the cone based on the starting diameter counting the 4mm steps to have the correct size you need. Examples:
7mm start will have 7mm, 11mm, 15mm,19mm………
8mm start will have 8mm, 12mm, 16mm,20mm………
9mm start will have 9mm, 13mm, 17mm,21mm………
10mm start will have 10mm, 14mm, 118mm,22mm………
With the four cones diameters from 7mm to 54mm are covered in 1mm increments.