Creality K1/K1C/K1Max 270-degree Geared Door Hinge Gaskets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are spacers / gaskets to protect the glass behind the Geared 270 degree hinges for the K1 series by Mordiev.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 150
- Wydruki
- 3
- Wyświetlenia
- 2059
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
These are spacers / gaskets to protect the glass behind the Geared 270 degree hinges for the K1 series by Mordiev. They were produced by taking thin slices of Mordiev's original objects so that the gaskets would have the shape and hole positions of the parts of the original hinges that contact the glass. Anyone can do this in a slicer, but perhaps these will save you some time. They could be scaled directly for other thicknesses or layer heights.
From my printer and settings, they come out a little less than 0.4 mm thick and are, by my measurements, a little less than 4 times as thick as painter's tape.
Mordiev's hinges with these gaskets seem to be working great on my K1. Thanks to him for designing and publishing those hinges.