Catapult dice tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Catapult tower with throwing dice with catapults
- Ocena
- 3,667 / 5
- Polubienia
- 469
- Pobrania
- 829
- Wydruki
- 3
- Wyświetlenia
- 12 747
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Castle dice tower with catapults for throwing and mixing dice - another one of my crazy ideas. I wanted to make this model a fun mechanical toy
You need to print the lower part and the upper part of the castle, the floor, 6X catapult, 6X safety pin - you have to stick it in the model. Even though it was so difficult for me that I didn't have to stick it.
And you still need 6 pieces of rubber bands with a length of 20-30 mm. The installation of the rubber bands and the operation of the tower are in the video.
Suitable for dice up to 16mm in size
I wish you a lot of fun!
Opened, catapults loaded, dice ready
Closed, catapults fired, dice mixed
Rubber band foundation system :
Unsuccessful pieces from the development of the project, about 250g of filament, mainly the lower part of the tower was tuned, I hope everything will be OK now!
