1 / 5
Remix of Bag Clip / Sealing Clips without overhang & support
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple print-in-place bag clip remix. Made the clips open at 15 degrees so they are printable on small-sized printer…
- Ocena
- 4,727 / 5
- Polubienia
- 74
- Pobrania
- 963
- Wydruki
- 13
- Wyświetlenia
- 2670
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 13) (Komentarze: 18)Remiksy (0)Kolekcje (114)Powiązane
Remixed from https://www.thingiverse.com/thing:4740831
A simple print-in-place bag clip remix.
Made the clips open at 15 degrees so they are printable on small-sized printer while keeping the two parts from sticking together.
Print with 3 perimeter for better strength.
Print Settings
Material:
Tested with ABS.
PETG might also work. Not sure about PLA.
Supports:
No
Infill:
30% or higher