1 / 2
Wall (or desk) Mount Hand Reamer Holder for 3 to 12mm Reamers, Plus Hand Grips for those Reamers — zdjęcie 1
1 / 2

Wall (or desk) Mount Hand Reamer Holder for 3 to 12mm Reamers, Plus Hand Grips for those Reamers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wall mount reamer holder, plus hand grips to use the reamers easily in plastic parts.

Ocena
0 / 5
Polubienia
2
Pobrania
38
Wydruki
0
Wyświetlenia
175
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Reamers, often seen as a precision machinist tool, but everyone who 3D prints items that have to bolt or screw together, or has parts that slide on pins and holes should own a cheap set of hand reamers.

They make short work of cleaning up holes which rarely 3D print to the exact dimensions you intend, especially on vertical walls.

 

Here is a wall mount holder to store a cheap set of hand reamers in. 

It can sit on the desk by your printer, or be screwed to a wall … where this holder can join up with the other tooling holders i have made. 

It holds reamers sized from 3 to 12mm…. based on the cheap set of 10 hand reamers amazon sell. 

 

Also included is a pair of hand grips to use with the 3 to 6mm, and 7 to 10mm reamers, these allow you to hold a reamer comfortably and safely, and turn it by hand when cleaning holes in 3D printed parts. 

Both grips take multiple sized reamers simply by having stepped square holes in them, so the largest reamer sits in the top hole, the smallest slides in past the other holes and engages in a lower hole. 

I didn't make a hand grip for the 11 and 12mm reamer as they usually need more torque than these simple hand grips provide. 

 

PRINTING:

Print the hand grips with 100% infill, they need to be strong otherwise the squares in them will just tear out when using them.

The holder, if attaching it to a wall i'd suggest 4 or 5 printed walls for strength, about 20% infill should be fine. 



********Possibly useless info below*********

Hand reamers are slightly tapered to help them enter a hole by hand, they also have a square on the end to allow them to be gripped in things like tap and reamer wrenches. 

Machine reamers are parallel and have no square on the end, then need to be rigidly mounted in a machine tool to use.

 

So if buying a set of reamers to use with 3D prints for the first time, make sure you get hand reamers. 

 

Finally, when using any reamer, only rotate it clockwise when it is in the material. 
Turning a reamer anti clockwise when in any material blunts them very fast, even in plastic.

Tagi