Fishing Lure Collection #2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the second edition of my fishing lure designs.
- Ocena
- 5 / 5
- Polubienia
- 137
- Pobrania
- 751
- Wydruki
- 1
- Wyświetlenia
- 3173
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the second edition of my fishing lure designs. (The first one is https://www.printables.com/model/868674-fishing-lure-collection-1 )
I have tested these lures and they work pretty well...the top water is a little hard to tune, so be forewarned!
I printed these at .15mm layer height with 10% infill in white PLA.
I have included a dwg file for the through wires in case you have inventor and can make use of them. I print them out on paper 1:1, glue it to a piece of 1/4" aluminum and at each bend, drill a 1/8" diameter hole. Then I put a 1/8" peg in them (I cut the heads and tip off a roofing nail). Then I made a little tool to help bend the wire around the peg for a perfect fitting through wire.
Hope you have as much fun making, painting and catching as I have.
Category: Sport & Outdoors
Update: June 17, 2024
Added older format DWG file for wire pattern.