Cone for yarn winder "royal" style, standard plastic wool winder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extra cones for all your yarn/wool winding needs. Print out extras and wind away!
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 2041
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This extra cone will fit on the “royal” style winders sold by mass retailers and also rebranded by individual companies. The original cone is pictured side by side of this model in the second photo.
The bottom of the cone has a divot to clear the hardware in the base of the winder.
Printed in PLA at 20% infill lower infill also works, but I am known to torque on my winder.
If you are going to print in a silk filament it will probably not fit in the base! Make sure to adjust for the swelling of silk if you want a glossy one!