Einsy Rambo & Raspberry Pi4 + onboard Fan case for stock Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This case can accomodate a Raspberry Pi4 with onboard fan. The Lid is changed to a honeycomb pattern
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 126
- Wydruki
- 3
- Wyświetlenia
- 2061
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This print is based on https://www.prusaprinters.org/prints/30296-einsy-rambo-raspberry-pi-case-for-stock-frame
I modified the case so it can fit a Raspberry Pi4 with onboard fan. My fan modell is ZP-0042
New design
Design from https://www.prusaprinters.org/prints/30296-einsy-rambo-raspberry-pi-case-for-stock-frame
Also i modified all M3 Nut holes from the case to fit normal Hex Nuts instead of the Square Nuts
More information you can find under the original print.
The connection information from the einsy board to raspberry pi 4 over GPIO you can find here : https://zaribo.com/blog/raspberry-pi-3-einsy-rambo-rpi-gpio-connection-tutorial/ or https://www.irrgang.dev/prusa-i3-mk3s-raspberry-pi-4-upgrade/
Very important notice for the GPIO connection to work is to have a common GROUND between the Einsy Board and Raspberry Pi4. So if you are using the original usb c cable or connect the RPI directly to a buck convertor, be sure to have a cable between each Ground