Planetside 2 Desktop Spitfire Turret
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small model I made of the Spitfire Auto Turret from the video game Planetside 2
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution
I was bored one day and decided to CAD up a spitfire turret. Then I realized I might as well put in an old servo and an Arduino I had lying around and here we are. It's designed to house an Arduino Pro Micro soldered to an SG90 micro servo where the servo sits facing downward and is attached to the tripod with one long screw (I used a 16mm M2 machine screw).
I put a bit of code on it so it would sweep back and forth every 5 seconds, nothing fancy. I made a video demonstrating the turret here: https://www.youtube.com/watch?v=3YgwMTeipII
Be sure to look at the parts list I included that details all of the parts and how many you need so that you don't forget to print multiple of some parts (like the feet pads or the back legs) and the gun, body, and side thing just need to be duplicated and mirrored to fit on the other side but they are otherwise identical.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament: Hatchbox PLA
Category: Electronics