1 / 7

F/A-18C Hornet MFD and UFC

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MysticAviator

@MysticAviato_2049395

Custom button panel for use with flight simulators such as DCS: World, modeled after the F/A-18C Hornet cockpit

Ocena: 0 / 5
Polubienia: 15
Pobrania: 93
Wydruki: 0
Wyświetlenia: 1188
Oceny: 0

Aktualizacja u źródła: 5 maj 2024

Informacje o modelu

Źródło: Printables
Kategoria: Video Games
Licencja: Creative Commons — Attribution

Szczegóły Pliki (9)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (30)

This is my design and contribution to the DIY flight simulator community. The part files include the following:

The 3 parts required to assemble the UFC (room for 21 keycap buttons, 6 automotive buttons, and 3 potentiometers)

A one-piece MFD frame that houses 20 keycaps

A tapered style keycap (used for the UFC on mine)

A flat top style keycap (used for the MFDs on mine)

a .dwg template for the full panel

In addition to the above files, there are also two files for the potentiometer mount (Pot Mount.stl) and the rocker switch mount (Rocker Mount.stl), which go on the bottom of the panel. You can mix and match where those go as they have the same outer dimensions.

Here's the hardware I used to make this:

6mm momentary buttons (3 packs for 60 buttons) - https://www.amazon.com/gp/product/B07WF76VHT/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

3 position momentary switches (for crs/hdg switches) - https://www.amazon.com/gp/product/B07LBLMY76/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

3 position toggle switch (for flaps) - https://www.amazon.com/gp/product/B01MYXGGX5/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

Momentary push buttons (for UFC side buttons) - https://www.amazon.com/gp/product/B07L1LVHJN/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

2 position toggle switch (for misc. switches) - https://www.amazon.com/Nilight-Rocker-Toggle-Switch-Waterproof/dp/B078KBC5VH/ref=sr_1_2?dchild=1&keywords=toggle+switch&qid=1613773323&sr=8-2

2 position toggle switch with cover (for misc. switches) - https://www.amazon.com/Nilight-90014E-Rocker-Toggle-Warranty/dp/B07QKFD7Z7/ref=sr_1_3?dchild=1&keywords=toggle+switch&qid=1613773323&sr=8-3

Potentiometer set - https://www.amazon.com/WGCD-Knurled-Linear-Rotary-Potentiometer/dp/B06WWQP12J/ref=sr_1_7?dchild=1&keywords=potentiometer+set&qid=1613773402&sr=8-7

LED kit (but you can use any 5mm LEDs) - https://www.amazon.com/DiCUNO-450pcs-Colors-Emitting-Assorted/dp/B073QMYKDM/ref=sr_1_3?dchild=1&keywords=LED+set&qid=1613773437&sr=8-3

Arduino Pro Micro (I used 3 of them for the whole build) - https://www.amazon.com/KeeYees-ATmega32U4-Development-Microcontroller-Bootloader/dp/B07FXCTVQP/ref=sr_1_2?dchild=1&keywords=pro+micro&qid=1613773460&sr=8-2

Arduino Mega (used for extra switches; interfaces with a pro micro with I2C) - https://www.amazon.com/ELEGOO-ATmega2560-ATMEGA16U2-Projects-Compliant/dp/B01H4ZLZLQ/ref=sr_1_3?dchild=1&keywords=arduino+mega&qid=1613773497&sr=8-3

Steel alloy machine screws (the holes are designed for M4 screws) - https://www.amazon.com/Washers-1200PCS-Sutemribor-Assortment-Wrenches/dp/B07H4MG7TC/ref=pd_bxgy_3/144-2339622-0494849?_encoding=UTF8&pd_rd_i=B07H4MG7TC&pd_rd_r=846f56a5-3338-469d-aa44-e0b8ec655e10&pd_rd_w=EC0Gc&pd_rd_wg=1KfRi&pf_rd_p=f325d01c-4658-4593-be83-3e12ca663f0e&pf_rd_r=3PWSFAVY2VG7ZFJAWEBY&psc=1&refRID=3PWSFAVY2VG7ZFJAWEBY