VHS video cassette small parts box for fishing lures and other stuff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reuse the cases from your old VHS video cassette to store small parts like fishing lures etc.
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 1759
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Reuse the cases from your old VHS video cassette to store small parts like fishing lures etc.
There's three variants, marked by an acronym in the file name:
- no bottom (nb): prints fastest, but small parts like fishing hooks tend to creep under the walls if they are not glued to the case
- with bottom (wb): better suited for small parts
- pocket bottom (pb) with raised bottom: more shallow compartments with two pockets under the bottom accessible from the back side for flat stuff like zipper bags etc.
The other parts of the file name give you an indication of the number of compartments and their sizes in mm, "v" is for a vertical, "h" for a horizontal compartment.
Printing is straightforwards, except for the "pb" variant. The raised bottom needs (a lot of) support. Alternatively, if you know how to make your printer bridge properly, print the "ws" version without support and remove the thin backside parts under the bottom which were added to enable bridging.
There's all kinds of different cases for VHS cassettes, so make sure that you get the type you can in my images.
In most cases you'll have to remove two raised parts and also the small side flanges with a sharp knife to make things fit (see images).
Category: Organization