Airsoft ASG Scorpion Evo MP5 Mag Lower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MP5 Lower for the Airsoft ASG Scorpion Evo.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 1637
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
MP5 Lower for the Airsoft ASG Scorpion Evo.
MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED.
2018 and newer Evos are a bit different from the older, pre-2018 Evo.
If you pull back the bolt and your gearbox has the ASG logo, it is most likely 2018 or newer. If it's blank, it's pre-2018
This also disables the empty mag cut-off
What you'll need:
2x M3x20 screw + nut
2x plastic self-Tapping Screws
2x Ball-point Pen Spring
I recommend heating the self tapping screws with a lighter before threading them into the mag release, to melt in the threads
I made some video assembly Guides:
I put a Lower Assembly gif in the pictures of this model
Installing the Lower
You'll need to print one lower, a BB Tube, A Mag Release, and A Mag Release Button.
The Selector shims are not necessary, but recommended to quickly get the alignment right.