1 / 2
Meade Polaris 127 and similar (160mm tube) focuser mount reinforcement
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Now you can tighten the mounting screws on your focuser full force like no tomorrow without bending the tube.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Share Alike
You print this and embed three M4 nuts into it using soldering iron. Now you can tighten the mounting screws on your focuser full force like no tomorrow without bending the tube. This will remove play when mounting heavy eyepieces or DSLR or both. You'll still have saggy focuser inner tube though.
Absolutely cursed in printing.
DONATE
ETH/Polygon: 0x7c888B61286Ea00E01e2b6979A2265588f7dfDaA
Trx: TFMuwm3zz5a5uDFUMei9tCUeUYCQNEuQTt
