1 / 3
Meade Polaris (and similar 127 aperture tubes) endcap repair V2 (will never let you down) — zdjęcie 1
1 / 3

Meade Polaris (and similar 127 aperture tubes) endcap repair V2 (will never let you down)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My used Meade Polaris 127 came with several retaining fins broken off the endcap.

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
77
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My used Meade Polaris 127 came with several retaining fins broken off the endcap. No wonder, i guess it falls down all the time (with a lot of noise).

I didn't want to waste a ton of plastic to print a whole new endcap, so i designed this ring that you can just insert into the damaged endcap to restore only broken fins (https://cults3d.com/en/3d-model/tool/meade-polaris-endcap-repair), but the cap kept falling out.

I raged, broke off remaining pins from my endcap and designed this new ring with elongated fins, that CLICKS in place and will never fall out.

STEP files included if you want to adjust it.

DONATE

ETH/Polygon: 0x7c888B61286Ea00E01e2b6979A2265588f7dfDaA

Trx: TFMuwm3zz5a5uDFUMei9tCUeUYCQNEuQTt

Tagi