TB-13/5E Bench Drill Depth Stop Holder / Halter für Tiefenanschlag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the a depth stop holder for a TB-13/5E bench drill made by Interkrenn, Einhell, Praktiker or Lematec
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 239
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacment part for the plastic depth stop holder for a TB-13/5E bench drill. These bench drills were made by different manufacturers like Interkrenn, Einhell, Praktiker or Lematec. I think the NUTOOL CH10 is also a compatible machine. Please let me know if you know more manufacturers or models were this can be used.
I made one version which is exactly like the original from my Interkrenn drill. I also made a version with an additional holder for the drill chuck key (Bohrfutterschlüssel). And the last model is a replacement for the pointer at the top of the depth stop.
Because it is mounted under tension I used PETG (and not PLA) with 100% infill. No support is needed. For mountig you need a bolt and a nut but you can use the original ones.