Dice Twister Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stop throwing your dices! It's time to give them a twist!
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 1179
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
Dice Twister Tower!
Stop throwing your dices! It's time to give them a twist!
Material
The tower can be completely 3D printed, but you can use some materials to enhance it:
- Jar Glass: with an external diameter of 80mm
- Bearing: 608zz (8x22x7mm)
Assembly
After printing all the parts, they all snap or twist in position.
Connect the action wheel with the roulette.
Slide them in to the base centre pole:
Slide and twist the upper part of the base to the lower. Pay attention to the grooves
Then slide the top bar in to lock the roulette in place
Finally Add the dome on top ( either the jar or the 3D printed voronoi version.
Enjoy your Games!
Pd.: Remember to upload you Makes!Looking forward to see them and get some feedback