Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fully 3D printable and customizable lamp.
- Ocena
- 4,833 / 5
- Polubienia
- 722
- Pobrania
- 2743
- Wydruki
- 8
- Wyświetlenia
- 15 786
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Recently I've printed the Maker Lamp by Agustin Arroyo for my bedroom.
My girlfriend liked it and asked if I could print something similar for her desk but in different shape, and so I set to work.
The lampshade can only be printed with a 0.6mm or larger (0.4 if your Printer is good enough) nozzle and in vase mode. Personally, I wouldn't recommend going bigger than 0.8mm.
With a 0,4mm nozzle the layers do not overlap sufficiently.
The socket hole size is 40mm and fits an E27 socket perfectly.
I think the Lamp Body can look really good with Fuzzy Skin.
Update 08.05.2025
I've added an Cap that snaps on tightly on the new modified Lamp Body.