Gantry leveling "beer cans" - Voron Gantry leveling aids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Manual gantry leveling aids for Voron gantry printers . Includes stand to hold them when not in use.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 566
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Printers with floating gantries such as the Troodon 2.0 Pro are unable to hold gantry squareness (tram) if they are turned off, or if there is any kind of accidental de-leveling of the gantry. This can prevent you from printing, or even can cause the nozzle to scrape the bed.
The classic quick fix is take 4 beer cans, disable the motors, and lower the gantry onto the beer cans and then carefully slide the cans out and then you can calibrate the gantry. Trouble is actual beer cans are too wide and you can de-tram the gantry when you slide them out.
These leveling beer cans are 1 inch across, stand on their own, and are tall enough to do the job. Print them with 3 perimeters and they'll be strong enough to hold up. If you have this kind of printer, you will need to use these occasionally- so I have also included a beer can stand to put on top of the printer and keep them handy. Note if your beer can infill is too high, the stand will tip.
You need 4 of them.