1 / 2
Non-Contact Tool for Keychain — zdjęcie 1
1 / 2

Non-Contact Tool for Keychain

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An accessory to avoid touching handles - especially during current times.

Ocena
5 / 5
Polubienia
26
Pobrania
79
Wydruki
3
Wyświetlenia
546
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Share Alike

A simple keychain tool for opening doors or grabbing objects. Print in any material with a high bending modulus and bending strength. PLA/PLA+ or PETG are both good choices, but more so the former. I tested this print using some PLA+ with several large refrigerators with no issues in opening the doors.

Print time is less than 30 min!

Printing Info:

  1. Perimeters ≥ 4 (the higher the better)
  2. Infill = None required (more perimeters are preferred)
  3. Layer height = 0.2mm
  4. Temperature = As high as your material allows

Please, consider buying me a drink if you got some use out of this print. 

Tagi