Tides bangle bracelet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bangle bracelet
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 202
- Wydruki
- 3
- Wyświetlenia
- 725
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A bangle, stl in different sizes. I hope you enjoy :) The pictures show prints in PET (blue) and PLA (other colors). In PLA and with below settings, they are solid yet leave 2-3 mm flexibility to be put on easy.
Settings for printing:
- I print mine without brim to make postprocessing easier
- Print settings in Prusa: “0,10 mm DETAIL”, or as detailed as you can to minimize print lines on the top.
- 100% infill - for esthetics and solidity.
- Plating: as shown in the picture, with the flat side on the bottom, worked best for me.
The sizes refer to the inside diameter of the bangle:
54 mm: 2,12 inch (XS)
57 mm: 2,24 inch (S)
60 mm: 2,36 inch (M)
67 mm: 2,63 inch (L)
70 mm: 2,75 inch (XL)
Your bangle size is the distance between the bottom knuckle of your thumb, folded inwards, and the other side of your palm.
Two fit in each other (see pictures).
Do let me know if you'd like a different size or if I can improve something!