Prussa/Reprap Mendel Refined Printer bits
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This posting has 3 modified bits for the Prussa/Reprap mendel printer to enable extra features.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
These bits are complete recreations with a caliper and much experimentation of NWRepRap (which is a modification of the Prusa Mendel) print on reprap.org. All were designed in OpenSCAD and those source files are included.
These modifications of the parts allow for the following:
- Filament runout and monitering using a bigtreetech sensor (v1)
- Wiping using a wall-mart sourced nylon (or metal) brush
- Changing of the wiping bit easily
- Printing everything without any supports.
The BigTree unit (if you have v2, you'll have to change the source file for it) … uses nylong pipes … which go to the extruder. I added a mount for the pipe endpoint to the guilder. It also tries to make sure the hobbed bolt gets better purchase on the filament. The BigTree sensor itself mounts on the Z-Axis motor mount (meaning filament comes from the right).
The left x-axis bit is modified to have screw holes for the wiper. The wiper can print flat on it's back and holds the cutoff portion of a brush (see picture) between it's lip and the nylon tie you can thread through it's holes.