Bouncy Dice Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bouncy dice Tower! Pull and release to roll your dices automatically
- Ocena
- 4,25 / 5
- Polubienia
- 114
- Pobrania
- 183
- Wydruki
- 4
- Wyświetlenia
- 2668
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Share Alike
Bouncy Dice Tower
Automated rolled based on the ortho-planar Spring mechanism.
| Chanelog |
| V1- Initial upload |
| V2 - 08/06/24 - Added lever variants |
Material
The tower can be completely 3D printed without support, but you can use some materials to enhance it:
- Jar Glass : with an external diameter of 80mm (optional)
- Glue (optional)
Assembly
There are different lever versions, only one of them is needed. The instructions were made for the short lever, in case you print the other versions, attach it after inserting the ortho-planar spring int he base.
After printing all the parts attach the finger lever to the orthoplanar mechanism. Glue them together for a better usability.
Then slide and snap inplace the ortho-planar spring to the base.
Finally add the dome or jar.
Enjoy making your dices bounce!
Remember to add your makes. I'm looking forward to see them and get some feedback :)