Frigidaire AC Remote Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall-mount Frigidaire AC remote control (YX1F8F or YX1F9F) holder to allow it to be used like an ordinary thermostat.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A wall-mount Frigidaire AC remote control (YX1F8F or YX1F9F) holder I designed so I could put the remote on the far side of my room and use it like a thermostat instead of leaving it precariously perched on the back of my couch near the AC unit itself. Just add a smidge of aluminum foil to the wedge on top (shiny side out) and it works like a charm.
It mounts quite easily with a single replacement strip for a Command Hook. The second version includes screw holes for a screw like this: https://www.mcmaster.com/90031A108/?SrchEntryWebPart_InpBox=90031A108 As I live in apartment, I have not tested the screw-in version.
Available on TinkerCAD here: https://www.tinkercad.com/things/kgy0jyUKzKR
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Filament: Inland PLA+ Blue
Notes:
No particular brand of aluminum foil required.
Category: Tool Holders & Boxes