Wusthof knife block risers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Risers for knife block feet to keep long knives from hitting the counter
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We discovered that one of the knives in our knife block was too long for the slot and was actually hitting the counter when inserted all the way into its slot. These spacers go onto the existing feet of the block to raise it enough so that the knife doesn't quite touch the counter when inserted.
These are based on attaching rubber feet on the bottom which are 10mm in diameter and 4mm thick, and to account for a knife that protrudes 12.8mm past the bottom of the block.
I originally intended to add magnet cavities to attach these magnetically to the screws in the existing feet, but it turned out that those screws aren't magnetic, so I used blue-tack putty instead.